DeLonghi Dishwasher Wartungshandbuch PDF herunterladen (Seite 14)

DESCALING

When the symbol appears, you must proceed with the

descaling equipment.

Important!

It is vital to respect the manufacturer’s safety warnings given on

the descaler pack and the warnings relating to the procedure to

follow in the event of contact with the skin and eyes.

Please note!

Use descaler recommended by De’Longhi only.

Failure to descale the appliance as described above also

invalidates the guarantee.

1. Turn the machine on.

2. Access the settings menu by pressing the MENU icon.

Scroll through the menu pressing the and icons

to select “Descale”.

3. Press the OK icon to select the function. Press OK again to

conrm.

4. “ADD DESCALER” “INSERT

WATER SPOUT” is displayed.

5. Empty the water tank

completely and remove

the water softener lter (if

present).

Pour the descaler into the tank

up to the level A (corresponding

to a 100 ml pack) marked on

the side of the tank (g. 32),

then add water (1 litre) up to

level B (g. 32) and put the

water tank back.

Place an empty container with a minimum capacity of 1.5

litres under the hot water spout.

Important! Danger of burns

Hot water containing acid ows out of the hot water spout.

Avoid contact with splashes of water.

6. Start descaling by pressing the OK icon.

7. The descale programme starts and the descaler liquid

comes out of the water spout. The descale programme

automatically performs a series of rinses and pauses at

regular intervals to remove limescale deposits from inside

the machine. The cycle lasts about 30 minutes and is

indicated by a progress bar which lls and empties.

8. “Rinsing” “FILL WATER TANK”. The appliance is now ready

for rinsing through with clean water. Remove the water

tank, empty, rinse under running water, ll with clean

water and replace.

9. Empty the container used to collect the descaler solution

and replace it under the hot water spout.

10. Press the OK icon to start rinsing. Hot water comes out of

the spout.

11. When “Descaling complete” “PRESS OK” is displayed, press

the OK icon. The appliance goes o.

12. Put the water softener lter (if present) back and ll the

tank.

To use the appliance, press the button.

SETTING WATER HARDNESS

Descaling is requested after a period of time established

according to water hardness.

The machine is set by default for a hardness value of 4 (very

hard water).

The machine can also be programmed according to the actual

hardness of the mains water in the various regions, varying the

frequency with which the message is displayed.

Measuring water hardness

1. Remove the “TOTAL HARDNESS TEST” indicator paper from

its pack.

2. Immerse the paper completely in a glass of water for one

second.

3. Remove the paper from the water and shake lightly.

After about a minute, 1, 2, 3, or 4 red squares form,

depending on the hardness of the water. Each square

corresponds to one level.

LEVEL 1

soft water

LEVEL 2

slightly hard water

LEVEL 3

hard water

LEVEL 4

very hard water

Set water hardness

1. Access the settings menu by pressing the

MENU icon. Scroll through the menu pressing

the and icons to select “Water

hardness”.

2. Conrm the selection by pressing the OK icon.

3. Press or to set the water hardness identied

using the indicator paper (see gure in the previous

section).

4. Press the OK icon to conrm the setting.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

DeLonghi Dishwasher Wartungshandbuch Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Geschirrspüler DeLonghi Dishwasher