DeLonghi L61GW Spezifikationen PDF herunterladen (Seite 17)

LIGHTING GAS BURNERS

FITTED WITH ELECTRONIC IGNITION

Figure 16

■ Check that the electricity is

switched on to allow spark igni-

tion.

■ Make sure that all controls are

turned to zero.

■ The gas flow to the burner is

controlled by the taps. The

switch for the electric ignition is

incorporated in the knobs.

■ The gas flow is controlled by

turning the knob indicator to line

up with the following symbols.

– Symbol ● : tap closed

(burner off)

– Symbol : High (maximum)

– Symbol : Low (minimum)

■ To ignite automatically, push the required knob down and turn it to maximum,

keeping the knob down until the burner lights

■ You can control the temperature by the knob to “High” from “minimum”.

■ To switch off, turn the knob clockwise until you hear the safety click.

■ Note that, if you are using a burner at the minimum setting, you turn the knob

clockwise past the maximum setting before reaching the off position.

■ Whenever the lighting of the burners is difficult due to peculiar conditions of

the gas features or supply, it is advised to repeat the ignition with the knob on

“minimum” position.

■ If when lighting any of the burners an abnormal flame appears, switch the

burner off and relight using the minimum setting.

■ If the flame is still not correct, turn the burner off and call our Customer Service

center for your nearest Authorized Delonghi Service Agent.

■ In the case of a mains failure light the burner with a match or lighted taper.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Keine Kommentare

DeLonghi L61GW Spezifikationen Seite 17