DeLonghi T series Spezifikationen PDF herunterladen (Seite 19)

LIGHTING THE BURNERS

(fitted with safety cut-off valve)

In order to light the burner, you must:

1 –

Models fitted with electric lighter incorporated into the burner knobs:

Turn the knob fig. 12 in anti-clockwise direction up to the maximum aperture

(symbol ), push in and hold the knob; this will light the gas.

2 – Wait for about ten seconds after the gas burner has been lit before letting go

of the knob (valve activation delay).

3 – Adjust the gas valve to the desired position.

Important

■ If the burner flame should go out, the safety valve will automatically stop the

gas flow.

■ To re-light the burner, return the knob to the closed ● position, wait for at least

1 minute and then repeat the lighting procedure.

■ N.B. If your local gas supply makes it difficult to light the burner with the knob

set to maximum, set the knob to minimum and repeat the operation.

■ Whenever lighting any of the burners produces an abnormal flame, switch that

burner off and relight using the minimum setting.

■ If after relighting the burner, the flame is still abnormal, turn the burner off and

contact our Customer Service Centre to obtain the nearest authorized Delonghi

Service Agent.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Keine Kommentare

DeLonghi T series Spezifikationen Seite 19